Summer Starts Here - Save up to 70%
Thule TracRac TracONE Ladder Racks Installation - 2008 Ford F-250 and F-350 Super Duty- Video
Speaker 1: Today on our 2008 Ford F-350 we're going to be test fitting the TracRac TracOne Truck Bed Ladder Rack. The TracRac Ladder Rack is perfect for carrying those elongated loads such as lumber, ladders, or even a kayak.Now the crossbars are 65 inches long. The system's going to have an 800 pound weight capacity and it's going to work with most trucks. Now the crossbars do also have channels on the top and the bottom so you can carry any of your T-channel accessories. It does come with four adjustable load stops so you'll be able to easily secure your load.Now compared to other ladder racks this does have a more aerodynamic design, which is going to cut down on wind noise. It is made out of aluminum, which means it's going to be resistant to any kind of corrosion and it's a no drill application. more
10/31/2018 4:07:12 PM
Speaker 1: All right, today on this 2004 Ford F-250 Super Duty, we're going to show you a TracRac Ladder Rack. Now, we have a vast majority of our rack installed on our truck already, and we'll go ahead and cover some of the details. First off, this is a no-drill application. The black rails actually fit into the pre-existing stake pockets in the truck. We have our upright here, closest to the cab. You notice it sits in the outside track of a rail on the bed. more
10/23/2018 1:02:57 PM
Speaker 1: Today on our 2005 Ford F250, we have our track rack universal steel rack truck bed ladder rack with over the cab extension. The built in over the cab extension provides additional support for extra long loads. Now that we have our ladder in place, I'll show you a few nice features about this. Plenty of places to wrap our strap around. This is just the generic cam buckle strap. You can strap to pretty much any point on here, and it's going to give you a nice solid sturdy place to strap. more
10/22/2018 10:47:12 AM
TracRac TracONE Truck Bed Ladder Rack Installation - 2008 Ford F-350- Video
Today, on our 2008 Ford F350, we're going to be test fitting the TracRac TracONE Truck Bed Ladder Rack, part number TA27000-01. The TracRac Ladder Rack is perfect for carrying those elongated loads such as lumber, ladders, or even a kayak. Now, the crossbars are 65" long. The system's going to have an 800 lb. Weight capacity, and it's going to work with most trucks. The crossbars do also have channels on the top and the bottom, so you can carry any of your T-channel accessories. It does come with four adjustable load stops, so you'll be able to easily secure your load. more
1/26/2017 12:22:12 PM
Thule Ladder Racks Review - 2008 Ford F-250 and F-350 Super Duty- Video
Today on our 2008 Ford F350, we're going to be test fitting a Thule Xsporter Pro Ladder Rack, part number TH500XT. This ladder rack is going to be great for carrying elongated loads such as ladders, lumbers or even a canoe or a kayak. The cross bars are 72" long. The whole system has a weight capacity of 450 pounds. One of the really nice features of this ladder rack, it does have an adjustable height. To adjust the height simply loosen the knob on each side. Now with the knobs loosened, we can simply slide the ladder rack down. more
1/25/2017 11:58:06 AM
TracRac Steel Rac Truck Bed Ladder Rack Installation - 2005 Ford F-250- Video
Today on our 2005 Ford F250, we have our TracRac Universal Steel Rack Truck Bed Ladder Rack with Over-the-Cab Extension, part number TA91000. The built-in over-the-cab extension provides additional support for extra long loads. Now that we have our ladder in place, I'll show you a few nice features about this. Plenty of places to wrap our strap around. This is just a generic CAM buckle strap. You can strap to pretty much any point on here and it's going to give you a solid sturdy place to strap. As you can see down here, we have our welded on cleats. more
11/6/2015 2:09:10 PM
MaxxTow Truck Bed Ladder Rack Installation - 2007 Ford F-250- Video
Today this 2007 Ford F250 Super Duty, we're going to show you the Max Tow Truck Bed Ladder Rack, part number MT70423. This is what ladder rack looks on a typical application on our Ford. Now, with this part number you get, of course, the complete set, the front here and the back. Aside from plastic end caps, this is created from all new construction. They basically bottom, also this is new construction with a power coat finish on top of it. The rack comes with two pairs of load stops. This is one of them right here. more
9/1/2015 12:56:06 PM
TracRac G2 Sliding Truck Bed Ladder Rack Installation - 2004 Ford F-250- Video
Today on this 2004 Ford F250 super duty, we're going to show you a track rack ladder rack. Part number TA21010-03-02. WE have a vast majority of our rack installed on our truck already. We'll go ahead and cover some of the details. First off, this is a no drill application. The black rails actually fit into the pre-existing stake pockets in the truck. We have it upright here, closest to the cab. more
7/13/2015 12:53:36 PM
Thule Ladder Racks Review - 2007 Ford F-250 and F-350 Super Duty- Video
Today, on our 2007 Ford F-250 Super Duty crew cab, we're going to be doing a test fit of the Thule Xsporter Pro adjustable-height truck-mounted ladder rack, part number TH500XT. With its nice, sturdy aluminium construction, this ladder rack is going to offer a 450-pound weight capacity, and it's going to be fully adjustable as far as the height and width. It will also come with the nice locking blocks on top so you can secure down your loads and pinch them in place. Let's go ahead, and we're going to show you how to put on the back one here since they're both going to assemble the same way, just in a different fashion. . All right, lift it up into place. Now you're going to need to make sure that you get it fully adjusted before you get it up on the vehicle. more
6/5/2015 12:41:06 PM
TracRac TracONE Ladder Racks Review - 2007 Ford F-250 and F-350 Super Duty- Video
Today on our 2007 Ford F250 Super Duty, we're going to be doing a test fit of the TracRac TracONE bed mounted ladder rack system. It's going to be part number TA27000-01. This going to come in a nice silver finish. It's sturdy aluminum construction that's going to offer that 800 pound weight capacity. It's also going to have your fixed mounting points. As you can see and once you get it up on the vehicle, you will be able to adjust these using your 7 30-seconds Allen tool, which will be for this as well as for your C clamps if you're going to mount it down. more
6/5/2015 11:42:30 AM
Thule Ladder Racks Review - 2012 Ford F-250 and F-350 Super Duty- Video
Today on our 2012 Ford F-250, we'll be doing a test fit of the Thule Exporter Pro. This is going to be your bed-mounted ladder rack system, with a 450 pound weight capacity, and be sturdy aluminum constructed. As you can see up top, you also get your stops for your cargo. Those are steel brackets with a twist knob to tighten then down. These are fully adjustable with height, and simply to do that, all you're going to do is get your measure for the top peak of your cab down to your bed. Then I'll tell you on the inside of these, if we can turn to that one right there, you'll see all the numbers here. That will be however tall it is. more
3/26/2015 3:05:22 PM
TracRac TracONE Ladder Racks Review - 2012 Ford F-250 and F-350 Super Duty- Video
Today on our 2012 Ford F250 we're going to be doing a test fit of the TracRac TracONE. This is going to be your bed-mounted ladder rack system, part number TA27000-01. As you can see we've already got it up here mounted into our vehicle. I'm going to go through how to put it all together and get it fitted to your particular vehicle. If you look up top you'll see the caps on the end. They will come off. They'll come off by loosening up this Alan bolt that's right here inside this rail. more
3/26/2015 2:58:54 PM
TracRac Pro2 Truck Bed Ladder Rack Installation - 2013 Ford F-250- Video
Today on a 2013 Ford F-250 Super Duty, we're going to install part number TA37003. This is a TracRac Pro 2 Truck Bed Ladder Rack Systemn for Super Duty pick-ups. One thing about our TracRac here is this actually will fit for a variety of vehicles. So to start off we already have our bars put together; one good tip, really good while you put in together is actually get a measurement, from the inside edge where you going to roughly put it to the other side edge. Put that on the garage or floor, and then build it up to that measurement then you can go ahead and put it on your truck. With that out of the way, let's go ahead and put our pads on in the place. For these they may go underneath for TracRac. What I'm doing is I am actually putting on the edge of the pad right up to the edge of the rail here. We found out that on testing in that we have to scoot it back enough to get enough room for our clamps. So let's have a certain amount of space. So let's put one on each side. Let us go ahead put our first TracRac in to place. We got to passenger side sitting in the place. Well just squeeze the driver's side in just a little bit. Make sure it's square with the truck. Now and go ahead and put our clamps in the place. more
10/20/2014 11:13:13 AM
TracRac T-Rac G2 Truck Bed Ladder Rack Installation - 2013 Ford F-250- Video
Today on our 2013 Ford F250, well be test fitting the Tracrac T-Rac G2 Truck Bed Ladder Rack for Ford Super Duty and Dodge Ram rated at 800 rounds, part number TA30000-03. With everything all assembled according to the included instructions, well begin or test fit by placing the front part of the ladder rack onto the front of our truck bed. Here at the cab you want to make sure that the feet, which rest along the bed rails, are facing the tailgate of the pickup truck. With the front part of the rack in place we can then measure the over hung of the top bar making sure it is equal on both sides. Once weve established this measurement, we can then tighten down the bolts using the included on wrench to secure the upright mass in place. Now with this down we can use the C clamps, which we will insert the bolt through the bottom of the C clamp as well as a silver bracket, which will rest on the underside of the bed rail. Well place the C clamps into the channels on the bottom part of the rack, which rests on the bed rail. more
9/4/2013 12:10:55 PM
Filter Videos
Filter Videos
